This is a legacy product. While it is available at this time, please note that we anticipate phasing it out (retiring) it by the end of 2023. If you have any questions, or would like assistance seeking an alternative solution, please contact our sales department.
Supplying absolute position and velocity data to your programmable controller, the single slot 7951 & 7952 Linear Displacement Transducer interface modules are a direct interface between most major brands of LDTs and the GE PACSystems RX7i controller. The 7961 will interface to any sensor that outputs up to 32 bits of SSI data.
The 7951 & 7952 are fully programmable from the sealed keyboard and display or through the backplane, and offer programmable position resolution down to one thousandth of an inch, with transducer lengths under one hundred inches. Additional programmable features include: position preset, count direction, and transducer type.
The 7961 is programmed through the backplane with resolution limited only by the sensor. Programming features include: position preset, data word length (up to 32 bit), and data scaling.
7951: Single-channel LDT interface module for GE PACSystems RX7i
Price| $2,167/ea
7952: Two-channel LDT interface module for GE PACSystems RX7i
Price| $2,891/ea
7961: Single-channel SSI interface module for GE PACSystems RX7i
Price| $2,079/ea
Note: Pricing is US Domestic only
Consult the factory for availability
Contact SalesAll AMCI plug-in module products for GE PACSystems RX7i PLCs provide guaranteed compatibility and utilize licensed I/O interface technology to ensure trouble-free performance.
By combining all electronics into one easily installed plug-in module, these single slot products eliminate the hassles associated with interfacing stand alone controllers and /or interfaces to Programmable Logic Controllers. Customers choose AMCI control solutions with confidence, knowing that we have over 20 years of experience in the design, development, and manufacturing of modules for General Electric PLCs.
AMCI products are uniquely designed to provide the best PLC integration available. Unlike other products that require a separate software package for configuration or operation, AMCI's PLC-based products are programmed using your PLC's software - nothing new to buy or learn!
Our expertise with the leading PLC manufacturers (e.g. Allen-Bradley Schneider, GE, etc) is unmatched when it comes to high performance Specialty I/O, Position Sensing, and Motion Control technology.
AMCI's products program using your PLC's native software - nothing new to learn or buy!
| AMCI Module | 7951 | 7952 | 7961 |
|---|---|---|---|
| PLC Platform | GE PACSystems RX7i | ||
| Number of channels | 1 | 2 | 1 |
| Position sensor | LDT - start/stop or pwm | SSI | |
| Maximum resolution | 0.001", LDT<100" 0.01", LDT<650" 0.1mm, LDT<9,999mm | transducer dependent | |
| Transducer compatibility | Balluf / MTS / Ametek / Turck -----------------------above brands with start - stop or pwm digital outputs | AMCI: DC25 SSI AMCI: ME15 SSI ------------------------ Balluff / MTS / SICK Stegmann Allen-Bradley | |
| Tachometer update time | programmable: 32, 60, 120, or 240ms | programmable: 1 - 1,000ms | |
| DC supply requirements | 850 mA max. @ 5Vdc | 550 mA max. @ 5Vdc | |
| Cable requirements | transducer dependent | ||
| Required hardware | external power supply for sensor | ||
| Optional hardware | na | ||
| AMCI Module | 7951 |
|---|---|
| PLC Platform | GE PACSystems RX7i |
| Number of channels | 1 |
| Position sensor | LDT - start/stop or pwm |
| Maximum resolution | 0.001", LDT<100" 0.01", LDT<650" 0.1mm, LDT<9,999mm |
| Transducer compatibility | Balluf / MTS / Ametek / Turck -----------------------above brands with start - stop or pwm digital outputs |
| Tachometer update time | programmable: 32, 60, 120, or 240ms |
| DC supply requirements | 850 mA max. @ 5Vdc |
| Cable requirements | transducer dependent |
| Required hardware | external power supply for sensor |
| Optional hardware | na |
| AMCI Module | 7952 |
|---|---|
| PLC Platform | |
| Number of channels | 2 |
| Position sensor | |
| Maximum resolution | |
| Transducer compatibility | |
| Tachometer update time | |
| DC supply requirements | |
| Cable requirements | |
| Required hardware | |
| Optional hardware | |
| AMCI Module | 7961 |
|---|---|
| PLC Platform | |
| Number of channels | 1 |
| Position sensor | SSI |
| Maximum resolution | transducer dependent |
| Transducer compatibility | AMCI: DC25 SSI AMCI: ME15 SSI ------------------------ Balluff / MTS / SICK Stegmann Allen-Bradley |
| Tachometer update time | programmable: 1 - 1,000ms |
| DC supply requirements | 550 mA max. @ 5Vdc |
| Cable requirements | |
| Required hardware | |
| Optional hardware | |
AMCI makes buying PLC-based automation easy...our sales group will help you:
Contact AMCI Sales today:
860-585-1254
AMCI's sales team takes the hassle out of placing your order. We'll advise on product selection, alternatives, lead times, and present you with point of purchase options. Call (860) 585-1254 or email AMCI sales today!
SSI Sensors and Interfaces: This 15 minute webinar explains SSI including why, where, and how i...
Watch Now
