ANA2(X) AnyNET-I/O Resolver Interface Networked I/O
Description
ANA2(X) AnyNET-I/O Resolver Interface Networked I/O
AMCI’s AnyNET-I/O ANA2(X) Resolver interface product is the easiest, most flexible way to bring Resolver sensor data into any PLC-based control system. AMCI's ANA2(X) connects a wide variety of Resolver sensors to your PLC using a standard network connection, and it programs using the host controller's (PLC) native software - nothing new to buy, nothing new to learn!
The ANA2(X) is the world's most versatile resolver interface. The programmable reference voltage, reference frequency, and transformation ratio allows the two channel ANA2(X) to directly interface with a wide variety of transmit resolver sensors. It can be connected to two single resolver transducers, including geared and redundant resolvers, or one dual resolver multiturn transducer, with either vernier or reduction type gearing - plus it's compatible with practically all manufacturers' versions. Additional ANA2(X) features include: absolute position, tachometer, and fault diagnostic data for single and multi-turn applications.
Expansion Capabilities
AMCI's ANA2(X) expansion modules allow you to easily interface up to (12) Resolver sensors using a single network connection, which reduces physical wiring and streamlines data traffic over the network.
No other product can challenge the flexibility, performance, and value of AMCI's ANA2(X) Resolver interface...no matter what PLC you're using!
Available Versions
ANA2(X): X = network interface
ANA2E: (EtherNet IP & Modbus TCP/IP)
ANA2P: (Profibus)
Price | $1,260/ea
Expansion module
ANA2: no network interface
Price | $1,155/ea
Note: Pricing is US Domestic only
Consult the factory for availability
Contact SalesANA2(X) Features
- Direct interface to most transmit Resolver sensors, including all mfrs & types
- Fully programmable: Reference Voltage, Reference Freq., and Transformation ratio
- 16-bit resolution (up to 65,536 counts)
- Expandable interface design can support up to 12 single resolver sensors
- Interface to two single resolver transducers or to one dual resolver transducer
- Provides absolute position and velocity data for resolvers
- Position scaling that simplifies sensor data
- Programming is easy via your PLC. No additional software required!
- Optional GUI interface for user orientation & test bench evaluation
- DIN rail mounting for simple, standard installation
PLC-Based Specialty I/O Solutions
AMCI’s AnyNET-I/O family is a distributed I/O system that combines hard to find specialty functions with a network interface, simplifying installation and cutting costs. The product family allows users to “mix & match” functions, including stepper motion
control and a variety of sensor interfaces, in a single solution.
AnyNET-I/O is compatible with any networked PLC/PAC and easily programs through the host PLC’s software. Its innovative product design simplifies installation, optimizes network performance, and ensures system integrity.
Multiple Resolver Interface: (1) ANA2(X) + (5) ANA2 shown below
The ANA2(X) easily expands from a 2-to-12 channel Resolver interface by stacking additional interface modules alongside the “gateway”, and it only requires a single network connection for all communication. This innovative product design simplifies installation, optimizes network performance, and ensures system integrity. Please see the diagram below for details.
Compatible Networks
AnyNET-I/O is compatible with any networked PLC
The Best PLC Integration Available
AMCI products are uniquely designed to provide the best PLC integration available. Unlike other products that require a separate software package for configuration or operation, AMCI's PLC-based products are programmed using your PLC's software - nothing new to buy or learn!
Our expertise with the leading PLC manufacturers (e.g. Allen-Bradley Schneider, GE, etc) is unmatched when it comes to high performance Specialty I/O, Position Sensing, and Motion Control technology.
Program Using Your Existing Software
AMCI's products program using your PLC's native software - nothing new to learn or buy!
Specifications
Product Specifications
| AMCI Module | ANA2(X) |
|---|---|
| Network Availability | ANA2E (EtherNet/IP and Modbus TCP) ANA2P (Profibus) |
| Number of channels | 2 single resolver transducers or 1 dual resolver transducer (expandable up to 12 resolver inputs) |
| DC supply requirements | 200 mA @ 24Vdc 375 mA with reference shorted surge to 30Vdc without damage to the module |
| Transducer Mfr. compatibility | AMCI Single-Resolvers Transducer: H25 / HT-6 / HT-20 / HT-400 / HT-20-(X) / R11X-J10/7 AMCI Multi-turn Resolvers: HTT-20 / HTT-400 / HTT-425 -AVG/Autotech Controls -Ametek/Gemco -Allen-Bradley/Reliance -Moog/Polyscientific -Kearfott -Clifton plus many more... |
| Transducer type compatibility | Single-turn resolvers, multi-turn resolvers, geared resolvers |
| Cable requirements | Transducer dependent |
| Programmable features | -Reference Voltage -Reference Frequency -Transformation Ratio -Counts Per Turn -Count Direction -Transducer Fault Latch -Apply Preset -Transducer Type (Dual Resolvers only) -Number of Turns (Dual Resolver only) |
| Included Connectors | MS-2x11 - I/O connector MS-4M - power connector IC-5 - interconnecting stack connector |
Product Specifications
AMCI ModuleANA2(X)
Network AvailabilityANA2E (EtherNet/IP and Modbus TCP)
ANA2P (Profibus)
ANA2P (Profibus)
Number of channels2 single resolver transducers or 1 dual resolver transducer
(expandable up to 12 resolver inputs)
(expandable up to 12 resolver inputs)
DC supply requirements200 mA @ 24Vdc
375 mA with reference shorted
surge to 30Vdc without damage to the module
375 mA with reference shorted
surge to 30Vdc without damage to the module
Transducer Mfr. compatibilityAMCI Single-Resolvers Transducer:
H25 / HT-6 / HT-20 / HT-400 / HT-20-(X) / R11X-J10/7
AMCI Multi-turn Resolvers:
HTT-20 / HTT-400 / HTT-425
-AVG/Autotech Controls
-Ametek/Gemco
-Allen-Bradley/Reliance
-Moog/Polyscientific
-Kearfott
-Clifton
plus many more...
H25 / HT-6 / HT-20 / HT-400 / HT-20-(X) / R11X-J10/7
AMCI Multi-turn Resolvers:
HTT-20 / HTT-400 / HTT-425
-AVG/Autotech Controls
-Ametek/Gemco
-Allen-Bradley/Reliance
-Moog/Polyscientific
-Kearfott
-Clifton
plus many more...
Transducer type compatibilitySingle-turn resolvers, multi-turn resolvers, geared resolvers
Cable requirementsTransducer dependent
Programmable features-Reference Voltage
-Reference Frequency
-Transformation Ratio
-Counts Per Turn
-Count Direction
-Transducer Fault Latch
-Apply Preset
-Transducer Type (Dual Resolvers only)
-Number of Turns (Dual Resolver only)
-Reference Frequency
-Transformation Ratio
-Counts Per Turn
-Count Direction
-Transducer Fault Latch
-Apply Preset
-Transducer Type (Dual Resolvers only)
-Number of Turns (Dual Resolver only)
Included ConnectorsMS-2x11 - I/O connector
MS-4M - power connector
IC-5 - interconnecting stack connector
MS-4M - power connector
IC-5 - interconnecting stack connector
Video
AnyNET Specialty I/O: PLC-Based Specialty I/O Solutions
AMCI’s AnyNET I/O family is a distributed I/O system that combines hard to find specialty functions with a network interface, simplifying installation and cutting costs.
Duration 01:25
AMCI makes buying PLC-based automation easy...our sales group will help you:
- Select the right product for your application
- Pay by credit card using your Visa, Mastercard, Discover, or American Express
- Coordinate alternative payment methods (P.O., wire transfers, etc.)
- Locate a distributor convenient to your region of the country
Contact AMCI Sales today:
860-585-1254
Ordering Information
AMCI's sales team takes the hassle out of placing your order. We'll advise on product selection, alternatives, lead times, and present you with point of purchase options. Call (860) 585-1254 or email AMCI sales today!
Create Your Part Number
Generate your ANA2(X) AnyNET-I/O Resolver Interface Networked I/O part number by using this helpful ordering guide. Starting from left to right, use the following diagram and table to choose the desired options.
Part Number Guide
| Part Number Character | ANA2(X) AnyNET-I/O Resolver Interface Networked I/O |
|---|---|
| Optional Network: | E = EtherNet IP & Modbus TCP/IP P = Profibus (leave blank for expansion module) |
Part Number Guide
Part Number CharacterANA2(X) AnyNET-I/O Resolver Interface Networked I/O
Optional Network:E = EtherNet IP & Modbus TCP/IP
P = Profibus
(leave blank for expansion module)
P = Profibus
(leave blank for expansion module)
Resources
AnyNET-I/O Brochure
AnyNET-I/O Networked Specialty I/O - a distributed I/O system that combines hard to find specia...
PDF DownloadResolvers Video
AMCI’s wide selection of resolver transducers, resolver interfaces for PLC based systems, and r...
Watch NowWhat's a Resolver?
When discussing resolvers, people often interchange terms such as: encoders, rotary position se...
Read the Tutorial
