PRESSPro GENESIS Stand Alone PLS Stamping
Press Controller |
Advanced Micro Controls, Inc. is a leading designer of stand
alone controllers for the stamping press
industry. The PRESSPro Genesis represents over 20 years of
engineering experience, and manufacturing expertise in the
field of metal stamping fabrication.
The PRESSPro Genesis is packaged with software to control
Programmable Limit Switch (PLS) outputs for crankshaft synchronization
and Die Monitor (DM) inputs to protect press dies and machinery.
The software can also monitor a brake input, and output a
fault signal if unexpected conditions occur. The display/keypad
is used to program a variety of software data screens enabling
the creation/storage of up to 50 custom tool setups for all
your stamping press control applications.
In turn, the PRESSPro Genesis provides users with flexibility
while ensuring the reliable operation of their press machinery.
SPECIFICATIONS:
PRESSPro GENESIS Stand Alone PLS Stamping Press Controller |
| PRESSPro GENESIS |
GN3B1-01A-00 |
GN3B1-01B-00 |
| Controller Type |
stand alone PLS |
stand alone PLS |
| Number of channels |
(1) channel |
(1) channel |
| Max. full scale count |
1,000 |
1,000 |
| Number of I/O: |
(6) on/off mechanical relay outputs
(2) fault mechanical relay outputs
(4) 24Vdc die protection inputs
(1) ac/dc brake monitor input |
(6) on/off solid state relay outputs
(2) fault solid state relay outputs
(4) 24Vdc die protection inputs
(1) ac/dc brake monitor input |
| Output update time |
100us |
100us |
| DC supply requirements |
0.5 A @24Vdc |
0.5 A @24Vdc |
| Additional functions |
- timed outputs
- speed compensation advances
- parts counter |
- timed outputs
- speed compensation advances
- parts counter |
| Transducer compatibility |
|
|
| Required hardware |
na |
(8) solid state relays, a combination of DC and AC relays
can be used.
KD-6 (DC relays)
KA-3 (AC relays) |
| Cable requirements |
CTL-X |
CTL-X |
PRESSPro
Series:
